The Gator Nano-Skin Clay Towel is made from a 6×6″ microfiber towel with a one-sided high-tech polymerized rubbing coating. It’s polymerized rubber coating grabs above surface contaminants and pulls them away from the surface, leaving you with contaminant-free clear coated paint unlike anything that you can ever achieve when cleaning the surface with a brush or wash mitt.
2. Next, fold the towel in four ways and work one panel at a time using Lube Job as your lubricant making sure to keep the surface of the towel and the panel being worked on liberally lubricated. Without applying any pressure, choose a small area about 1-2 square feet in size, and move the towel left to right, back and forth in one direction, and up and down. Make sure that you are using a fast hand motion. We recommend that you do not use a circular motion. ALWAYS make sure not to go beyond the lubricated area!
3. After the Speedy Surface Prep Towel glides smoothly across the surface, flip it to another side and lightly go over the area once more.
4. Wipe away any excess Lube Job Clay Lubricant and move on to the next section.
Note: Unlike a Clay Bar, if you drop the Gator Nano-Skin Clay Towel, you do not need to throw it away…..simply rinse it with water. Do not use harsh cleaners to clean the Gator Nano-Skin Clay Towel. Once completing a vehicle, gently rinse the towel with a mild soap and warm water. Lastly, make sure the towel is completely dry before storing.ju