GATOR NANO-SKIN JUMBO SURFACE PREP CLAYING TOWEL

Our Gator Nano-Skin Clay Towel can be used to remove above surface contaminants before any type of paint correction or preservation work.  The Gator Nano-Skin has unique abrasives which are infused into the towel’s polymer coating, enabling them to abrade the contaminates on top of the clear coat such as iron particles or over spray, without cutting, removing, or damaging the underlying clear coat.

The Gator Nano-Skin Clay Towel is 12×12″ and will last approximately 100 uses versus a Clay Bar which will last about 10-20 uses.

SKU: SSP-589 Categories: , ,

Description

The Gator Nano-Skin Clay Towel is made from a 12″x12″ microfiber towel with a one-sided high-tech polymerized rubbing coating.  It’s polymerized rubber coating grabs above surface contaminants and pulls them away from the surface, leaving you with contaminant-free clear coated paint unlike anything that you can ever achieve when cleaning the surface with a brush or wash mitt.

How To Use The Gator Nano-Skin Clay Towel:
1. Saturate the surface being worked on and the Gator Nano-Skin Clay Towel with a clay lubricant like Lube Job or Showroom Shine.

2. Next, fold the towel in four ways and work one panel at a time using Lube Job as your lubricant making sure to keep the surface of the towel and the panel being worked on liberally lubricated.  Without applying any pressure, choose a small area about 1-2 square feet in size, and move the towel left to right, back and forth in one direction, and up and down.  Make sure that you are using a fast hand motion.  We recommend that you do not use a circular motion.  ALWAYS make sure not to go beyond the lubricated area!

3. After the Speedy Surface Prep Towel glides smoothly across the surface, flip it to another side and lightly go over the area once more.

4. Wipe up an excess Lube Job Clay Lubricant and move on to the next section.

Note:  Unlike a Clay Bar, if you drop the Gator Nano-Skin Clay Towel, you do not need to throw it away…..simply rinse it with water.  Do not use harsh cleaners to clean the Gator Nano-Skin Clay Towel.  Once completing a vehicle, use a mild soap and lukewarm water to soak the towel and gently wring out before storing.

You may also like…